Info for anyone looking for a VM Mustang Pickguard

[Sjtanona]

After looking at a bunch of threads on here in search for a replacement pickguard, and to seemingly no avail, I found a seller on eBay that sells replacements! His store is "Precisiongtr."

I bought a Jagstang setup for my HH Mustang, and it worked flawlessly! Discovered through correspondence he also does the VM stuff as well. Just an FYI for those who may be looking around!

 

[VealCutlet]

Thanks for the info. Pics of your guitar?

 

[Sjtanona]

Thanks for the info. Pics of your guitar?

Haven't got the pickguard yet, hopefully get it ordered today. Bridge is off at the moment, needed washers to lock it down. Going with a black pearloid pickguard

 

[scrub]

I have one of his Mustang pickguards. It is really nice.

 

[rbh32]

I got a mustang pg from them when I had mine. It was really well cut and holes lined up great.

 

[Caddy]

Good to know. I have two white pearloid guards that I bought for my VM Mustang and both would take a lot of work to make fit, so I haven't used them.

 

[Sjtanona]

I got it ordered, an I'm very optimistic to the fit. Will put up pics when it's all back together! Waiting on a few more parts

 

[Afrika61]

I ordered one from Terrapin guitars for 2xP90 and it was a great fit.

 

[Sjtanona]

Good to know! Seems like there are a ton of folks asking where to get one, and a lot of em out there don't fit!

 

[Afrika61]

Good to know! Seems like there are a ton of folks asking where to get one, and a lot of em out there don't fit!

I think that the issue was that, until recently, there was only the OEM configuration available: I was looking for a two P90 set-up with an American Standard HT bridge and I was out of luck until someone here mentioned Terrapin. They only just started cutting PGs for Mustangs and they were more than happy to cut one the way that I wanted. Excallent fit from them too I might add. I might ask them about a Tele pup gaurd for the Mustang at some point in the future(IF I can get my other projects completed!).
Ah, here we go:
http://www.terrapinisland.com/chitzenitza/index.php?main_page=product_info&cPath=10&products_id=136

 

[Sjtanona]

Looks like they can do about anything! Pricing is higher than the fella I mentioned, but he may not have all the same stuff

 

[squier-esquire]

I am actually wanting a specific pickguard made....

Thanks for the info!!

 

[squierbilly]

After looking at a bunch of threads on here in search for a replacement pickguard, and to seemingly no avail, I found a seller on eBay that sells replacements! His store is "Precisiongtr."

I bought a Jagstang setup for my HH Mustang, and it worked flawlessly! Discovered through correspondence he also does the VM stuff as well. Just an FYI for those who may be looking around!

Somebody say jagstang,, HH mustang,, more pics?..

 

[Sjtanona]

Somebody say jagstang,, HH mustang,, more pics?..

This is my Squier Bullet with the custom pickguard