Riverdrifter
Squier-Meister
The built in pick holder.
Fender LT25 bonus feature!
- Thread starter Riverdrifter
- Start date
DougMen
Squier-Axpert
You're just discovering that now? It can also hold string winders, allen wrenches, and other guitar assorted sundry. Occasionally though, it takes a bit of maneuvering to get the picks that have wandered far under the lip handle towards the knobs out of there. I see you still, like me, haven't removed the plastic protection over the screen.
BTW, what does the FS do?
Riverdrifter
Squier-Meister
In the menu you can program any 2 channels to switch between with the footswitch. It works pretty slick.
DougMen
Squier-Axpert
Since one of my two Katana Minis is covering that area now, I've taken a different approach for holding my pick collection (the most frequently used dozen or so, of the hundreds I have). The bowl holds the Tortuga, Ultex, Dunlop and Fender assorted colored pearl ones, Tortex with the Martin logo, and a few others with the logo from the store I worked at. My three current favorites, consisting of the Tortuga, Ultex, and grey pearl Dunlop reside on top of my THR10C sitting next to the LT25.
You can see that I'm not good about dusting off the tops of the amps, lol
You can see that I'm not good about dusting off the tops of the amps, lol
DougMen
Squier-Axpert
I found some cool metal rack at Ross when I still worked there, and with the top baskets removed, they make great stands for the THRs to bring them up off the floor to ear level for me, because I play sitting on the edge of my bed, which is some twin mattresses stacked on the floor with no frame or box spring. And, the bottom baskets are used to hold extra strings, cables, pedal patch cords, more picks, cloths, polish, tools, and my multimeter. The amps are all facing me a couple of feet away.
I used to have an ABY box that I used with some Y cables, so I could run both THRs, both Minis, and the LT25 at the same time. The ABY box started freaking out, and I've been too lazy to troubleshoot it, so I devised a mad scientist arrangement of Y cables and adapters to allow use of four of the 5 at the same time. The GT40 is only there as a stand for the Mini on the left. I rarely use the Mini on top of the LT25, and usually now just use the left Mini and LT25 at the same time, but I sometimes add the two THRs also. I use all the amps clean and run an overdrive pedal for dirt, so I have my 7 favorite OD pedals in between guitar and amps.
The looper isn't in the chain, because if it is it sucks tone from the guitar. So, I only plug into it to record a loop, and its output to play back loops goes into the aux. in on the LT25.
I used to have an ABY box that I used with some Y cables, so I could run both THRs, both Minis, and the LT25 at the same time. The ABY box started freaking out, and I've been too lazy to troubleshoot it, so I devised a mad scientist arrangement of Y cables and adapters to allow use of four of the 5 at the same time. The GT40 is only there as a stand for the Mini on the left. I rarely use the Mini on top of the LT25, and usually now just use the left Mini and LT25 at the same time, but I sometimes add the two THRs also. I use all the amps clean and run an overdrive pedal for dirt, so I have my 7 favorite OD pedals in between guitar and amps.
The looper isn't in the chain, because if it is it sucks tone from the guitar. So, I only plug into it to record a loop, and its output to play back loops goes into the aux. in on the LT25.
Riverdrifter
Squier-Meister
Nice setup!
