Quote:
Originally Posted by shutterbiker
grumpy (i hope it's ok to call you grumpy)
|
No problem Steve. I chose the name (with a little help from my wife!) I didn't find it too hard to fit them, the lo-tack tape makes it easy to mark the positions, and stops the drill bit slipping. As one screw holds two tuners, you don't want it to be out, otherwise the screw can go in crooked and that's when they can break as you get them all the way in
The tuners (WJ55CR) are great, they're good and smooth, and they stay in tune well, even with a bit of whammy bar! I went for the slotted type. I'm putting a set on my '94 MIM Squier very soon, we'll have to compare notes! I'll be filling all the old screw holes whether they can be seen or not, will probably glue in matchsticks / cocktail sticks and level off, I don't like leaving holes where there shouldn't be any. I'll probably be spraying the headstock at some point.
Post some pics when you've done yours, will be
to see how they look.
Paul.
